|
|
Build Your Online Product Catalogs?
| Product Name: |
Jaw crusher eccentric shaft failure treatment method
|
| Supply Ability: |
100 per month |
| Related proudcts |
jaw crusher, stone crusher, stone crusher prices, |
| Specifications |
A variety of models |
| Price Term: |
L/C T/T |
| Port of loading: |
Qingdao, Shanghai or Tianjin |
| Minimum Order |
1 |
| Unit Price: |
Negotiable |
|
Coarse crushing jaw crusher is used for more material, after the eccentric shaft failure maintenance cycle is long, affect the normal production of crusher. There are three solutions.
1. Change the flywheel end seal set screw and the taper sleeve to
Because the thread is right-handed, gland to carry mobile belt pulley, the pulley of the taper sleeve not loose, so the pulley, thread end to do not need to change the flywheel end seal set and taper sleeve after the threaded from right to left, the eccentric shaft rotates counterclockwise, due to the effect of inertia force, seal set of moving in the direction of the flywheel and top tight flywheel, which in turn will flywheel end taper sleeve top tight on the eccentric shaft, to loosen taper sleeve on the eccentric shaft does not produce.
2. Repair eccentric shaft with taper sleeve fitting surface
Increase the contact area of the wear of the eccentric shaft and cone form surfacing welding, after the coarse and fine models of mating surface grinding, grinding method is: put the repair good taper sleeve on the eccentric shaft mating surfaces, with 400 purpose emery grinding medium, a grinding 0.5 h, the emery clean, besmear mimeograph calibration, such as unqualified, in the way to grinding, until it meets the requirements.
3. Repair the wear of the flywheel end
Due to the flywheel and sealing set of contact face wear 100 mm, so the flywheel side with a short set of 100 mm long.
Through the above method to improve processing, jaw crusher use effect is good, the eccentric shaft with taper sleeve is no longer loose, save a lot of ***re parts costs, reducing the workload of maintenance, equipment technical conditions improved, the normal operation of equipment safety and high rates of operation.
As you used in jaw crusher, maintenance, repair, need to replace the wearing parts, welcome to through our website online consulting, serve you 24 hours a day.
For more product information:
http://www.micrusher.com/index.html
http://www.kelmachine.com/index.html
|
| Company: |
LIMING Heavy Industry Science and Technology Co. LTD
|
| Contact: |
Ms. Liu Yang |
| Address: |
No.169, Science (Kexue) Avenue |
| Postcode: |
|
| Tel: |
0371-86549132 |
| Fax: |
0371-86549132 |
| E-mail: |
|
|
|
|
Home
